ContourScanner CS1
To enhance OEE, we developed the ContourScanner CS1 to detect defective packaging. The CS1 helps improve OEE by minimizing disruptions
Technical data
Voor dit component zijn nog geen specificaties vastgelegd.
7 questions about the ContourScanner CS1
What is the thickness of the powder coating layer on the machines?+
The thickness of the powder coating must be at least between 60µm and 90µm per layer. With a primer and a topcoat, the thickness is at least 120-180µm. When having an EPD coating, an extra 18-25µm is added.
Can the machines be used in a cleanroom (no dust) environment?+
The machines are not designed for cleanroom use.
What is EPD (KTL) coating?+
EPD coating is a pretreatment before powder coating, which makes the coating more resistant to e.g. moisture environments.
Can the machine be supplied with EPD (KTL) coating?+
Yes, the machine can be supplied with EPD (KTL) coating.
Is there any difference in handling taped cartons or glued cartons?+
The requirements for the cartons are the same, both types of cartons should be closed properly without any loose or flapping lids. However, taped cartons can have loose tape ends, so when working with them extra sensors are placed at higher positions to detect such cases.
How often do we need to lubricate the bearings?+
Bearings we have installed do not need to be lubricated. Installed bearings are sealed bearings (ZZ and 2RS) and are factory-filled with grease. They cannot be re-lubricated. These bearings have a maintenance-free lifespan. Re-lubrication is not necessary; instead, in case of wear or reduced performance, the bearings should be replaced.
Can the machines be placed in an ATEX environment?+
The machines are not suitable for ATEX environments. It has not been designed or certified for use in explosive atmospheres as defined by ATEX standards.
Ready to specify this machine for your system?
Request a quote