Frequently asked questions

The lead time for Prorunner 12 is generally between 12 to 16 weeks*, with custom requirements taking a longer time.

*(this time is an approximation and can be subject to change, when placing an order you will get a definitive delivery time)

The lead time for Prorunner Mk10 is generally between 12 to 16 weeks*, with custom requirements taking a longer time.

*(this time is an approximation and can be subject to change, when placing an order you will get a definitive delivery time)

The lead time for Prorunner Mk9 is generally between 12 to 16 weeks*, with custom requirements taking a longer time.

*(this time is an approximation and can be subject to change, when placing an order you will get a definitive delivery time)

The lead time for Prorunner Mk5 is generally between 8 to 16 weeks*, with custom requirements taking a longer time.

*(this time is an approximation and can be subject to change, when placing an order you will get a definitive delivery time)

The lead time for Prorunner 2 is generally between 12 to 16 weeks*, with custom requirements taking a longer time.

*(this time is an approximation and can be subject to change, when placing an order you will get a definitive delivery time)

No, neither this or any other palletizer can be used in freezer conditions. They use pneumatics, which are not apt to be used in cold environments (anything under 10 degrees Celsius), and have other parts that have not been tested for freezer conditions. A deep-freeze palletizer is in development.

Vertical movement of SR2 is done by a Movimot Flexible + DRN AC drive.

Due to mechanical limits MM adv cannot be fitted.

The Prorunner 12 is designed in accordance with Directive 2006/42/EC and Directive 2014/30/EU. With a focus on person safety. The belt is oversized with a safety factor greater than 4, minimizing the risk of belt failure.

In the unlikely event of a belt failure, no person should be present within the safety zone.

If the belt fails, the motor will continue to rotate and initiate braking. At that point, the automatic locking device will engage.

For the PR12, the use of the automatic locking device is not mandatory, as each carrier is equipped with two belts. The likelihood of both belts failing simultaneously is extremely low.

Belt is steel enforced and 50mm wide, which would give that the max. toothed belt load (safety factor >4) is 7,680N and breaking load 26,870N per belt. The PR12 is equipped with two belts so we can double this number.

Maximum weight of HD carrier + conveyor + product is 360kg. With an acceleration of 2m/s^2 and gravity 10m/s^2 that gives a maximum force of 4,320N.

Max. toothed belt load of the PR12 is therefore a total of 15,360N (whereby the safety factor is already >4) of which we will go up to 4,320N. (approx. 30% of the indicated max. toothed belt load and approx. 8% of the breaking load).

Hereby: If one of the PR12 belts breaks, the other can catch it. The carrier will then not fall down immediately.

The Prorunner 2 is designed in accordance with Directive 2006/42/EC and Directive 2014/30/EU. With a focus on person safety. The belt is oversized with a safety factor greater than 4, minimizing the risk of belt failure.

In the unlikely event of a belt failure, no person should be present within the safety zone.

If the belt fails, the motor will continue to rotate and initiate braking. At that point, the (automatic) locking device will engage.

The use of the (automatic) locking device is mandatory for the PR2.

Belt is steel enforced and 32mm wide, that would give that the max. timing belt load (safety factor >4) is at 4,915N and breaking load at 17,196N.

Maximum allowed mass of conveyor + product is 150kg. The total mass lifted by the belt (so incl. carriage, carrier tubes, reinforcement, etc.) is then approx. 190kg. With an acceleration of 2m/s^2 and gravity 10m/s^2 that gives a maximum force of 2,280N.

Max. timing belt load of the PR2 is therefore a total of 4,915N (where the safety factor is already >4) of which we will go up to 2,280N. (approx. 46% of the indicated max. timing belt load and approx. 29% of the breaking load).

The thickness of the powder coating must be at least between 60µm and 90µm per layer. With a primer and a topcoat, the thickness is at least 120-180µm.

When having an EPD coating, an extra 18-25µm is added.

Actuators that Qimarox use without UL/CSA classification, are underneath the 100VA and are thereby usable when using a Class 2 Power Supply and/or is secured with for example product number 9000-41042-0100400 of Murr Electronics.

The maintenance should be done from below. The recommended free space below the shuttle conveyors is 800mm. This information is also shown on the drawings shared in offer and order phase.

Yes, the front covers (Alupanel) are available in the following colors:

Black RAL9005

Blue RAL5002

Digital White

Green RAL6005

Green RAL6024

Ivory RAL1015

Red RAL 3020

Silver RAL9006 (standard color)

White

Yellow RAL1023

Yes, this is a standard option which can be used when the infeed side of the products is the same side as the outfeed side of the products.

Qimarox is unable to provide a bank guarantee. We supply highly standardized products, which allows us to keep stock of most parts. This enables us to offer short lead times and keep our pricing as competitive as possible.

Additionally, a bank guarantee limits financial spending capacity because the bank holds a portion of available funds as collateral. These blocked funds cannot be used for other investments or operational expenses.

As we have many different situations it’s hard to compare directly but in general energy consumption is lower as in our machines we only use energy to move the product and there is no large steel parts that needs to get into motion.

The lead time for Prorunner Mk1 is generally between 6 to 16 weeks*, with custom requirements taking a longer time.

*(this time is an approximation and can be subject to change, when placing an order you will get a definitive delivery time)

The machines are not suitable for temperatures above 40 degrees Celsius. Its components have not been rated or classified for use in such high-temperature environments. Operating the machine beyond this limit may lead to performance issues, accelerated wear, or component failure. For applications requiring higher temperature resistance, get in touch with Qimarox.

The machines are not available in a hygienic version. It has not been designed or constructed to meet the specific requirements necessary for hygienic applications. As alternative we can supply a stainless steel version and for the Prorunner mk5 a Wash Down version is available.

The machines can be configured in multiple variants for use in moisture environments or when the machines are cleaned with water. To ensure durability and performance, materials and protective coatings resistant to corrosion are essential. Proper selection of components, such as EPD coating, stainless steel or the Wash Down variant, can prevent material degradation.

The machines can be configured in multiple variants for use in environments involving saltwater exposure. To ensure durability and performance, materials and protective coatings resistant to corrosion are essential. Proper selection of components, such as stainless steel or EPD coating, can prevent material degradation. For applications requiring salt water resistance, get in touch with Qimarox.

The machines can be supplied without the inclusion of zinc material. If desired, alternative materials or coatings can be used based on specific requirements. For applications requiring no zinc parts, get in touch with Qimarox.

The machines are not designed for cleanroom use.

The machines can be used in dusty environments. It is crucial to adhere to the prescribed maintenance schedule to ensure optimal performance and longevity. Dust accumulation can impair functionality, leading to increased wear and potential failure. Regular maintenance helps prevent these issues, safeguarding operational efficiency and reducing downtime. Compliance with the maintenance plan is essential for sustained reliability and safety. Please note that the machine can not be used in ATEX environments.

The machines has not been tested or calculated for seismic regions. Structural integrity under seismic loads is unverified. Design modifications or anchoring may be necessary for compliance and safety. Until then, operate with caution in high-seismic-risk areas.

No, we can only handle cartons with relatively flat bottom / top within current design.

We don’t work with agents or sole distributors. Our vertical conveyors are sold to every OEM or System Integrator, for our palletizers we only work with companies that made a strategic decision to add the Qimarox solutions to their product portfolio, and are approved and trained by us. We still can have different partners in a region or industry, if an end-user is requesting several contacts we will provide these. A lead is forwarded first to a Gold, Silver and last to Bronze partner. If you are an integrator and interested in becoming a Certified System Partner please contact us.

The belt wear is reliant on a large number of factors like environment, product weight, speed of the machine, running ours etc. This is why the user manual states to check the belt every week on wear, damage, noise and connections (to the carrier) and act accordingly.

EPD coating is a pretreatment before powder coating, which makes the coating more resistant to e.g. moisture environments.

Yes, the machine can be supplied with EPD (KTL) coating.

Brackets can be mounted in both orientation. The customer can implement whichever is easier.

No, we do not have a lift specially made for ‘Clean room enviroment’. We do have the mk5 WD, which is made of stainless steel and can be power washed. It is for the integrator to decide if this complies.

No, there can be differences due to total chain length, column height, product height and number of carriers needed for the capacity. This is to maximize utilization of the chain wheel used to tension the chain.

Yes, technically this is possible. This needs to be confirmed for each request by engineering. Pallet weight and capacity is important to know. Total weight must not exceed 6500 kg (incl. product weight). When the weight is higher, some column sections might be reinforced.

The machine needs to be anchored to the floor, see documentation. Above 4 meters height the machine also needs to be anchored every 4 meters to a solid structure for sideways stabilization.

This depends on the motor and the customer’s preference. We use brake voltage 400V AC as standard.

This is to increase the friction between the rollers and the product. This allows, for example, plastic crates (which slide easily) to be transported more effectively. It can also reduce the noise level when ‘harder’ products are transported.

Yes, the standard lifts require pneumatics for the safety drop pins. However, the drop pins of the mk10(-PS) are also available as electric versions, making the mk10(-PS) pneumatic-free.

No, a standard mk5 does not use pneumatics. However, some add-on conveyors such as tilting conveyors or bypass stoppers require pneumatics.

No, this machine does not use pneumatics.

Yes, however, consideration must be given to the stiffness of the lift. Often, cross-braces need to be omitted, creating large openings. These can be replaced by ‘special’ cross-braces, with separate holes drilled in the columns.

No, this option is not available on the lifts. There is a locking pin on the carrier, but it has a fixed pitch (of 125 mm), so there is no flexibility in stopping positions.

The purpose of the locking pins is to secure the carrier for safety reasons (for example, when a safety door is opened or someone passes through a light curtain). The locking pins are not intended for use during the loading or unloading of pallets.

It’s a safety feature. For example, if there’s an emergency stop because of an entrapment or entanglement situation, the emergency stop will ensure there’s no more compressed air in the system which allows the horizontal cylinder to be moved and free the person involved. It also ensures the safety of anyone during maintenance or solving problems.

Yes, but: – There must be a minimum of 500 mm space behind the gear motors. – There must be enough space between the columns to remove the covers and access the gear motors (these are generally located in the upper and lower columns).

Yes, this is possible. However, the lift needs to be recalculated to see if the gear motor still meets the requirements. It might be needed to equip the machine with a new gear motor. Always consult Qimarox for changes.

Yes, it is possible. The conveyor must fall within the specifications of the vertical conveyor (see specifications).

The standard is with an infeed and outfeed sensor on the column and a rotation detection on the lower sprocket for a basic lift. The conveyors all have two standard photocells with reflectors to detect the products.

No, we supply standard modules with SEW gear motors. These modules are engineered based on the sizes of these gear motors (shafts, attachment, clearance), and deviating from this can cause a lot of customization.

In certain situations, this is possible (Always in consultation with and with approval of Qimarox). There are special brackets with which the lift can hang through a floor. We can supply the brackets, but the integrator needs to construct the attachment for fixating the machine to the floor.

No, the x-size is limited to the maximum values provided in the lift specifications. Because it is a continuous lift, the forks on the opposite side come along in the opposite direction. If a product is too wide, a collision will occur.

This is possible, but the machine is not designed for this purpose. The mk5 is essentially a continuous vertical conveyor meant to start empty and then continue running continuously. When the machine is used for start-stop sequence, a heavier gear motor will needed.

It is possible. When the products are placed side by side, it is important that they are properly centered and guided during insertion. When the products are placed one behind the other, it must be taken into account that a gap may occur between the products if there is a difference in speed between the feeding and infeed conveyor. Possible solution is to use a 2-zone conveyor.

In all cases, it is important that the center of mass of the total combination of products rests approximately in the middle of the conveyor.

We installed chain slack detection sensors at every corner of the carrier. These sensors can detect if there is a malfunction with (one of) the chains. When the carrier can’t move down, slack is created in the chains, which stops the machine. At stopping of the machine the drop-down safety will be activated to prevent the carrier from falling.

Yes, with all our vertical conveyors it is necessary to use a frequency inverter. In most situations, the inverter needs to have a “hoist” function for safe operating. Please contact our support if there are any further questions.

Both gear motors of a MK10 can always be controlled with a single frequency inverter.

No, that’s not possible. The drive section is designed to work with the SEW gear motors. This way, we can make the mk10 have a relatively small footprint for its lifting capacity.

Yes, it is possible in most cases. However, it is dependent on the configuration. Please contact our sales representative for further information.

On the Prorunner mk10 it is also possible to mount a rotating roller conveyor (turn-table).

The folowing encoders are available: EI71 (SEW), EI72 (SEW), EI76 (SEW), EI7C (SEW). Other encoders can be requested and evaluated.

No, these machines are not available in stainless steel. However, we can supply stainless steel feet and colored parts are available with KTL coating for extra corrosion protection.

All our vertical conveyors need to be integrated into an automated system. Loading manually or with forklift is not allowed. There is also the option to have AGVs or AMRs driving themselves onto the lift, using a platform instead of a conveyor on the carrier.

The smallest available footprint for the Prorunner mk10 is 1650 x 2100 (mm).

The Prorunner mk10 lift is mechanically designed to handle pallets up to 2000kg. Depending on the requirements of your project, like the weight of your pallet, and throughput, we select the gear motor specifically for your application.

The maximum (top) in/outfeed level is 10.8m when using an Qimarox conveyor.

No, this model pallet lift works with two flat belts, which result in low noise operations and less maintenance than conventional chains.

The Prmk9 can handle a maximum load of 1,500 kg, including both the conveyor and the product.

The mk9 is delivered with a drop-down safety mechanism, which is not removable. This system is operated by compressed air and can not be made electrical at this moment. If an electrical drop-down system is required please use our Prorunner mk10.

No, The Prorunner mk9 is designed to work with an automated conveyor system and may not be loaded manually or with a forklift.

We recommend at least 500mm clearance at the back side and 200mm at the left and right side.

Qimarox can supply a roller conveyor or a chain conveyor. There is also a possibility of mounting an OEM conveyor. Please contact our sales representative for further info.

We can supply a gearmotor with encoder. However, we do not recommend using the encoder for positioning. The Prorunner mk9 uses a winding pulley; therefore, the covered vertical distance varies with every rotation.

It is strongly advised to only use belts supplied by Qimarox to ensure the machine can be operated safely. Qimarox is not responsible from any issues that arise from using non original parts.

Pallet dispensers are not equipped with AC drives. They are operated by pneumatic cylinders.

Vertical movement of SR2 is done by Movimot Flexible + DRN AC drive.

Due to mechanical limits MM adv cannot be fitted.

Some components of LR1 can be equipped with MoviMot advanced, but not all of them. Please consult with a sales representative.

The requirements for the cartons are the same, both types of cartons should be closed properly without any loose or flapping lids.

However, taped cartons can have loose tape ends, so when working with them extra sensors are placed at higher positions to detect such cases.

The high level infeed palletizers (HRx) are available with MoviMot Advanced + DRN AC drives.

Please consult with a sales representative for other Movimots.

The sensors in the MK1 detect the detection strip in the carrier, it is necessary for both sensors to be activated for the carrier to stop. In the additional positions, where the carrier can come from above and below, this means that when the carrier comes from below, the lower sensor acts as the slow down, and the higher sensor as the stop, and when the carrier comes from above, the higher sensor acts as the slow down, and the lower sensor as the stop.

Belt is steel enforced and 50mm wide, which would give that the max. toothed belt load (safety factor >4) is 7,680N and breaking load 26,870N per belt. The PR12 is equipped with two belts so we can double this number.

Maximum weight of HD carrier + conveyor + product is 360kg. With an acceleration of 2m/s^2 and gravity 10m/s^2 that gives a maximum force of 4,320N.

Max. toothed belt load of the PR12 is therefore a total of 15,360N (whereby the safety factor is already >4) of which we will go up to 4,320N. (approx. 30% of the indicated max. toothed belt load and approx. 8% of the breaking load).

Hereby: If one of the PR12 belts breaks, the other can catch it. The carrier will then not fall down immediately.

The maximum column height of the Prorunner mk5 Wash Down is 7850mm. Till a column height of 5900mm the machine will be delivered fully assembled. When the column is higher than 5900mm the machine will be delivered in pre-assembled modules and assembly on site is required.

Currently a Twistrunner is not sold as a stand-alone unit. Please check availability with your sales representative.

There standard language is English but there are multiple languages available, such as Spanish. Any other language can be brought in if needed. Language can easily be switched at wish on the panel.

Yes, every Qimarox palletizer can handle ‘incomplete’ layers or pallet loads. If it receives a signal (manual or automated) that the last SKU of a batch has entered, the machine can empty itself out fully automated.

A Twistrunner is driven by one or two gear motors (depending on type of Twistrunner) operated by a frequency controller. The rollers of the Twistrunner are belt driven. For every belt driven roller conveyor we always have a spare belt installed to make sure down time is minimized as much as possible if a belt would need replacement.

Yes, this is possible. There are two options; the first is with front infeed (v-belt conveyors), in this situation there will be an of sett of 650mm between the infeed and discharge conveyor. The second option is from the side with roller conveyors, in this situation the product needs to pass the down going part of the vertical conveyor and therefore the overall throughput is lower.

To know if this is possible we need to have more information on the I/O module to use so we can check if it can be mounted on the same location as our standard unit or if we need to make changes to the design. In every situation additional cost can apply and it may also effect delivery time. Preferred is to stick with the standaard options supplied by Qimarox.

Leaving the unit out will also generate additional cost as it would require a change request. Ask your sales representatives for the possibilities.

This is done due to noise generation by the wheels. Also at higher (maximum speeds) the acc. and dec. time needs to be longer and distance might not be enough to reach max. speed

This depends on the motor and the customer’s preference. We use brake voltage 400V AC as standard.

This is to increase the friction between the rollers and the product. This allows, for example, plastic crates (which slide easily) to be transported more effectively.

Yes, the standard lifts require pneumatics for the safety drop pins. However, the drop pins of the mk10 and mk10-PS are also available as electric versions, making the mk10 and mk10-PS pneumatic-free.

All our vertical conveyors are fully electrical. However, some add-ons such as tilting conveyors or stoppers (e.g. in a bypass conveyor) require pneumatics.

No, this lift does not contain pneumatics.

Bearings we have installed do not need to be lubricated. Installed bearings are sealed bearings (ZZ and 2RS) and are factory-filled with grease. They cannot be re-lubricated. These bearings have a maintenance-free lifespan. Re-lubrication is not necessary; instead, in case of wear or reduced performance, the bearings should be replaced.

The machines are not suitable for ATEX environments. It has not been designed or certified for use in explosive atmospheres as defined by ATEX standards.

The Prorunner vertical conveyors always carry the CE certificate from Qimarox. When the system integrator incorporates the lift into a larger system, they must issue a CE certificate for the entire system to ensure overall compliance.

No, this is not always possible. There is a vent nipple on top of the gear box, which will leak if the motor is rotated 180° when mounted on the other side. Consult Qimarox if you wish to change the position of the gear motor

Yes, this is possible. The nut plates provide extra stability, preventing twisting during loading and unloading of products. If the conveyor (OEM) is rigid enough, this should not be a problem.

This is currently not available as an option, MOVIMOT is available and often sufficient. If MOVIGEAR is desired, it may be possible to offer that (in consultation with engineering).

Yes this is possible, costs depend on desired period (determine value for this per month / per machine type). Contact your sales representative or our Support Department for more information for your situation.

Maintenance information is available in the “Downloads” section of our website. Another option is to go to the corresponding product page, click on the “Downloads” tab, and select “Manuals” to access all maintenance details of the specific product. Each manual includes a dedicated maintenance chapter. For direct access, visit; https://www.qimarox.com/downloads/.

At Qimarox, you can experience our vertical conveyors, the PRmk1 and PRmk5, as well as our Highrunner in full operation. Our showroom provides an extensive overview of our other innovative solutions, and you’ll also have the chance to see how we are organized and how the assembly process is structured.

Yes, you can. Please contact us at support@qimarox.com.

In most situations the integrator that installed the unit is first point of contact.

Depending on the actuator type, the safety-pins are pneumatic or electrically retracted. During normal operation, pressurized air or power is provided. If power or pressurized air is shut off, the pins will be activated.

Yes this is possible, there is a cable channel available.

The valve is located at the bottom, backside of the machine, under the cover next to the gearmotor.

By not using a counter weight it’s possible to have more flexibility for your lay-out as pallets can go in and out in each direction. Anther factor is cost, on engineering, material and maintenance. For each different application the weight would be different and by adding moving parts maintenance becomes more expensive. Also the counter weight would need safety pins for person safety when entering the safety zone.

All these additional costs will not compensate the slightly higher cost of a stronger gear motor.

An absolute encoder gives an absolute position. An incremental encoder measures the changes in position. With each movement, counting the number of steps. Qimarox uses incremental encoders from SEW because of their high quality and simplicity.

Yes the diameter of the rollers is 40mm, although the drive roller has a diameter of 50mm.

If the optional sleeved roller is used the rollers have a diameter of 44 mm and the drive roller of 54mm.

Yes, there is an XL version with a maximum product size up to 900 x 610mm.

With additional parts the Prorunner mk5 can be installed in a freezing environment up to -25⁰C.

The Mk5 XL becomes an option when product dimensions exceed 600 x 610 mm.

No, that’s not possible. The mk5 is engineered for indoor use.

Yes, We can deliver this machine in the RAL colour of your choice.

Please check with your sales representative the implications on cost and delivery time.

Yes, due to the flexible design, we can configure a continuous lift with shuttle conveyors, so products can move up and down at the same time.

The maximum capacity is subject to various things such as the product dimensions and column height. In ideal situations, the capacity can go up to 1800 per hour.

Yes, but in order to maximize buffering capacity, the lift has to operate in step by step mode (Start-Stop). The capacity is very dependent on the configuration. Please contact our sales representative for more information.

No, retractable conveyors have an IP rating of 54, which is not enough to be washed down.

The included documents are a layout of the vertical conveyor (2D, 3D), specifications of the unit and gear motor and a list of the spare parts with risk table and a 3D pdf file to identify parts.

The maximum product size of the Prorunner mk5 is 600×610 mm. The maximum product height depends on the height of the machine and the requested capacity. We also offer the Prorunner mk5 XL, which can transport 900×610 mm.

There are multiple factors that determine the capacity of a mk5 vertical conveyor.

Most important factor is the maximum height of the products to be handled.

Some other factors: column height, amount of in- and outfeed levels, conveyor type, product weight and product size.

The Prorunner mk5 is, besides the standard, available as a (partly) stainless steel and a washdown version.

Every machine can be wipe-down by using standard cleaning material and cloth. Only the PRmk5-WD can be cleaned using water.

No, The mk5 is a fully pre-engineered machine. During development, the gear motor position has been chosen with load and energy consumption in mind. Changing the position to the bottom of the lift would have a negative impact on energy consumption.

An FAT can be arranged up to a certain height. Please consult your sales representative for possibilities.

In most situations the final assembly is performed on site to reduce shipment cost and optimize handling of the parts. In these situations a FAT will not be possible.

No, the mk5 wash-down has the same maximum product dimensions as a standard mk5 (600×610). If the need arises to transport bigger products, we recommend the mk5 XL, which can transport products up to 900×610 mm, however the mk5-XL is not available as a Wash-Down version.

No, our vertical conveyors are designed to work within an automated conveyor system.

Yes, a functional description and software block will be provided by Qimarox.

We supply software blocks for both Siemens and AllenBradley Platforms, the software can be used to be implemented within your project software.

Our aim is to make integration of the equipment as easy as possible to any integrator.

Yes, a VFD is necessary. To make sure the unit is operating as expected it is needed to enable ‘hoist-application’ in your VFD settings.

Hoist-application is a term used for certain settings in the VDF that make an electric-motor suitable for hoist-solutions.

It is also needed to correctly set high and low speed settings.

We have chosen a belt for less noise and less maintenance. The belt is also very robust and durable.

Yes this is possible but we strongly advise you to make use of our experienced technicians on site (ask our sales department for the options in your region). If this is not possible Qimarox supplies the assembly instructions.

Yes, a stainless steel version is available but it’s not fully hygienic or wash down. If you need a full wash-down solution we can offer you the Prorunner mk5 wash-down.

Yes, the Prorunner mk1, PR2 and PR12 are available with an electric or pneumatic actuated safety pin.

The Prorunner mk1 and mk5 are available with a MoviMot drive system. This is not a standard component, which means that delivery time may be longer and costs may be higher.

It’s possible to use an encoder for the Prorunner mk1 in combination with a laser/sensor. Get in touch with Qimarox sales for the details.

Another alternative is to use the PR2 when multiple stopping positions or more precise positioning is required. The PR2 is equipped with an encoder on the gearmotor and the preferred solution.

The standard color is RAL 9007 (grey) for the column and product conveyor.

Some parts are zinc plated.

Other color combinations are possible but additional charges and extra delivery time might apply.

The maximum vertical speed of the Prorunner mk1 is 1,7m/s

This is not possible. Limit switches are included in the standard design of the machines, because of safety regulations these can’t be removed.

You have the option to choose the motor position – left or right. The gear motor of the Prorunner mk1 can not be placed on a lower position.

It is typically positioned on the left side as standard, but it can also be configured on the right side to suit your specific requirements.

If you need to convey product vertically and if you need to optimize floor space usage a vertical conveyor is a good solution. The Prorunner mk1 is a solid and simple solution for a small investment when compared to other vertical conveyors. With many installations world-wide it is a proven solution for many different applications

FCA/CIF/DDP/DAP

We pack our products on wood with an heat treatment. When the shipment goes overseas we use VCI worthy foil to ensure that the shipment is free of moisture and dust.

Yes, all our wood is treated against pests by a heat treatment and meets the world wide ISPM 15 standard.

The chains are treated in a hot oil bath so the internal parts are oiled. There’s no grease on the outside because this attracts dirt.

You can contact Support Department by phone 0341-436700. You can contact Support Department by email support@qimarox.com.

Qimarox is based in Harderwijk in the Netherlands, an hour’s travel time from Schiphol Airport (Amsterdam).

The standard warranty period is 13 months after ready for shipment date for new machines, the period of warranty can be extended at an additional cost. More information about warranty: apply the received conditions.

A machine builder and/or integrator can buy directly from Qimarox. End customers can’t buy directly from Qimarox and an integrator has to be involved, please contact Qimarox for this.

You can request a quote via the quote request form (https://www.qimarox.com/offer-request/). Our staff will then put you in touch with a system integrator, where you can order the Qimarox components.

You can request a quote via the quote request form (https://www.qimarox.com/offer-request/). Our staff will then contact you. You can order directly after receiving the quote.

How we work

Qimarox is a specialist that produces material handling components in quantities. This results in a standard product, high quality with a competitive price.

This of course depends on the height of the lift and any accessories ordered. However, each lift can be sent in modules, which means that the volume can be very limited.